Foxwell RT1000 Automatic Brake Bleeder Kit Dual Pulse Vacuum Brake Fluid Exchanger with Pressure Gauge
All-in-One Brake Fluid Change is Smarter and Easier
The Foxwell RT1000 is an automatic brake fluid exchanger that makes bleeding brakes simple and efficient. With one-click operation, built-in dual pumps and adjustable pressure control, it enables one-person operation while ensuring stable performance. The clear pressure gauge and safety features prevent overpressure and air entry, delivering a clean fluid exchange every time. Compatible with a wide range of vehicles, it's a reliable choice for both professionals and DIY users.
When is A Brake Fluid Change Necessary
When brake fluid has a moisture content exceeding 3% and becomes cloudy with deposits, the pedal feels spongy, or the warning light comes on, it's time for a change. Manual bleeding is slow and unreliable, but the RT1000 delivers a fast, clean, one-person exchange with constant pressure and dual pumps, ensuring no air enters the system and old, contaminated fluid is fully flushed out. This is perfect for repair shops, fleet service, and DIY car owners who want to make sure their brakes are safe and efficient.
Advantages of RT1000
Unlike other products which rely on single-pulse flow and manual pumping, the RT1000 is equipped with dual built-in vacuum pumps and double-pulse technology. This design delivers stable pressure, prevents air from entering the brake system and enables a more thorough fluid exchange. Furthermore, its automatic operation, adjustable pressure settings and 110V/220V compatibility make it safe and more efficient - perfect for professional workshops, mobile mechanics, home garages or mobile mechanics alike!
Adjustable pressure knob and pressure gauge
If you are worried about damaging your brakes, this is the solution for you. This Brake Fluid Bleeder Kit features a user-friendly pressure knob and clear gauge, so you know exactly what is happening. It automatically limits output to 0.3 MPa, preventing risky over-pressurisation and ensuring a smooth start-up every time. If the unit doesn't start, increase the pressure to 0.2MPa , press and hold "START" for a few seconds to initiate operation.
Dual Switch Design & Low Fluid Auto Shut-Off
Our innovative brake pressure release kit features a fail-safe dual switch design that prevents accidental high-pressure activation if the adjustment knob isn't properly reset. This professional-grade system integrates low-fluid auto shut-off technology, automatically powering down the equipment when brake fluid levels drop critically - protecting your vehicle's braking system from air intrusion and irreversible damage.
Brake Solutions to Save You Time & Money
2 Man to 1 Man Job. No need for anyone else to pump the brakes and the new method is much faster.
After turning on the power switch, press and hold the START button while adjusting the pressure to 0.2 MPa for the device to begin operating (both actions should be done simultaneously).
Two Brake Sub-Pumps
Change Brake Fluid at the same time, more efficient.
Dual brake sub-pumps enable simultaneous fluid replacement, boosting efficiency, ensuring consistent brake performance, and simplifying the process. For optimal results, replace brake fluid in this order: left rear, right rear, left front, and right front.
Use the withdrawal device to remove excess brake fluid
Brake fluid can be highly corrosive, so after changing out all the brake fluid in a vehicle it is recommended that its reservoir be checked for excess brake fluid and any extra must be pumped off so as to ensure no overflow and corrosion to occur on your car.
Note: For American or Asian vehicles, please purchase the appropriate adapter separately for optimal fit and performance.
Package List
All-in-One Brake Fluid Change is Smarter and Easier
The Foxwell RT1000 is an automatic brake fluid exchanger that makes bleeding brakes simple and efficient. With one-click operation, built-in dual pumps and adjustable pressure control, it enables one-person operation while ensuring stable performance. The clear pressure gauge and safety features prevent overpressure and air entry, delivering a clean fluid exchange every time. Compatible with a wide range of vehicles, it's a reliable choice for both professionals and DIY users.
When is A Brake Fluid Change Necessary
When brake fluid has a moisture content exceeding 3% and becomes cloudy with deposits, the pedal feels spongy, or the warning light comes on, it's time for a change. Manual bleeding is slow and unreliable, but the RT1000 delivers a fast, clean, one-person exchange with constant pressure and dual pumps, ensuring no air enters the system and old, contaminated fluid is fully flushed out. This is perfect for repair shops, fleet service, and DIY car owners who want to make sure their brakes are safe and efficient.
Advantages of RT1000
Unlike other products which rely on single-pulse flow and manual pumping, the RT1000 is equipped with dual built-in vacuum pumps and double-pulse technology. This design delivers stable pressure, prevents air from entering the brake system and enables a more thorough fluid exchange. Furthermore, its automatic operation, adjustable pressure settings and 110V/220V compatibility make it safe and more efficient - perfect for professional workshops, mobile mechanics, home garages or mobile mechanics alike!
Adjustable pressure knob and pressure gauge
If you are worried about damaging your brakes, this is the solution for you. This Brake Fluid Bleeder Kit features a user-friendly pressure knob and clear gauge, so you know exactly what is happening. It automatically limits output to 0.3 MPa, preventing risky over-pressurisation and ensuring a smooth start-up every time. If the unit doesn't start, increase the pressure to 0.2MPa , press and hold "START" for a few seconds to initiate operation.
Dual Switch Design & Low Fluid Auto Shut-Off
Our innovative brake pressure release kit features a fail-safe dual switch design that prevents accidental high-pressure activation if the adjustment knob isn't properly reset. This professional-grade system integrates low-fluid auto shut-off technology, automatically powering down the equipment when brake fluid levels drop critically - protecting your vehicle's braking system from air intrusion and irreversible damage.
Brake Solutions to Save You Time & Money
2 Man to 1 Man Job. No need for anyone else to pump the brakes and the new method is much faster.
After turning on the power switch, press and hold the START button while adjusting the pressure to 0.2 MPa for the device to begin operating (both actions should be done simultaneously).
Two Brake Sub-Pumps
Change Brake Fluid at the same time, more efficient.
Dual brake sub-pumps enable simultaneous fluid replacement, boosting efficiency, ensuring consistent brake performance, and simplifying the process. For optimal results, replace brake fluid in this order: left rear, right rear, left front, and right front.
Use the withdrawal device to remove excess brake fluid
Brake fluid can be highly corrosive, so after changing out all the brake fluid in a vehicle it is recommended that its reservoir be checked for excess brake fluid and any extra must be pumped off so as to ensure no overflow and corrosion to occur on your car.
Note: For American or Asian vehicles, please purchase the appropriate adapter separately for optimal fit and performance.
Package List
Original: $320.00
-70%$320.00
$96.00Description
All-in-One Brake Fluid Change is Smarter and Easier
The Foxwell RT1000 is an automatic brake fluid exchanger that makes bleeding brakes simple and efficient. With one-click operation, built-in dual pumps and adjustable pressure control, it enables one-person operation while ensuring stable performance. The clear pressure gauge and safety features prevent overpressure and air entry, delivering a clean fluid exchange every time. Compatible with a wide range of vehicles, it's a reliable choice for both professionals and DIY users.
When is A Brake Fluid Change Necessary
When brake fluid has a moisture content exceeding 3% and becomes cloudy with deposits, the pedal feels spongy, or the warning light comes on, it's time for a change. Manual bleeding is slow and unreliable, but the RT1000 delivers a fast, clean, one-person exchange with constant pressure and dual pumps, ensuring no air enters the system and old, contaminated fluid is fully flushed out. This is perfect for repair shops, fleet service, and DIY car owners who want to make sure their brakes are safe and efficient.
Advantages of RT1000
Unlike other products which rely on single-pulse flow and manual pumping, the RT1000 is equipped with dual built-in vacuum pumps and double-pulse technology. This design delivers stable pressure, prevents air from entering the brake system and enables a more thorough fluid exchange. Furthermore, its automatic operation, adjustable pressure settings and 110V/220V compatibility make it safe and more efficient - perfect for professional workshops, mobile mechanics, home garages or mobile mechanics alike!
Adjustable pressure knob and pressure gauge
If you are worried about damaging your brakes, this is the solution for you. This Brake Fluid Bleeder Kit features a user-friendly pressure knob and clear gauge, so you know exactly what is happening. It automatically limits output to 0.3 MPa, preventing risky over-pressurisation and ensuring a smooth start-up every time. If the unit doesn't start, increase the pressure to 0.2MPa , press and hold "START" for a few seconds to initiate operation.
Dual Switch Design & Low Fluid Auto Shut-Off
Our innovative brake pressure release kit features a fail-safe dual switch design that prevents accidental high-pressure activation if the adjustment knob isn't properly reset. This professional-grade system integrates low-fluid auto shut-off technology, automatically powering down the equipment when brake fluid levels drop critically - protecting your vehicle's braking system from air intrusion and irreversible damage.
Brake Solutions to Save You Time & Money
2 Man to 1 Man Job. No need for anyone else to pump the brakes and the new method is much faster.
After turning on the power switch, press and hold the START button while adjusting the pressure to 0.2 MPa for the device to begin operating (both actions should be done simultaneously).
Two Brake Sub-Pumps
Change Brake Fluid at the same time, more efficient.
Dual brake sub-pumps enable simultaneous fluid replacement, boosting efficiency, ensuring consistent brake performance, and simplifying the process. For optimal results, replace brake fluid in this order: left rear, right rear, left front, and right front.
Use the withdrawal device to remove excess brake fluid
Brake fluid can be highly corrosive, so after changing out all the brake fluid in a vehicle it is recommended that its reservoir be checked for excess brake fluid and any extra must be pumped off so as to ensure no overflow and corrosion to occur on your car.
Note: For American or Asian vehicles, please purchase the appropriate adapter separately for optimal fit and performance.
Package List